J2954. Η SAE θεσπίζει το πρότυπο στην ασύρματη φόρτιση

10:50 27/5/2016 - Πηγή: AutoBlog

Μπορεί η θέσπιση ενός προτύπου για την ασύρματη φόρτιση ηλεκτρικών και plug-in υβριδικών οχημάτων από την SAE να προκαλεί χασμουρητά σαν είδηση, αλλά η πραγματικότητα είναι πολύ διαφορετική. Η σημασία της θέσπισης του SAE TIR J2954 είναι τεράστια και δεν είναι λίγοι αυτοί που υποστηρίζουν ότι ανοίγει τον δρόμο για την διάθεση της τεχνολογίας της ασύρματης φόρτισης σε πολύ ευρύτερη βάση.

Το J2954 είναι το αποτέλεσμα της δουλειάς μίας επιτροπής υπό τον Jesse Schneider και περιλαμβάνει

συστήματα από 3,7 έως 22 kW – με την υποσημείωση ότι το άνω όριο μπορεί να επεκταθεί αργότερα. Αν λοιπόν θέλουμε ένα μέλλον που μπορούμε να παρκάρουμε το ηλεκτρικό ή plug-in υβριδικό αυτοκίνητο μας για να φορτίσει ασύρματα χωρίς να σκεφτόμαστε την συμβατότητα του συστήματος με το όχημα μας, αυτό το πρότυπο είναι το Α και το Ω.

Δελτίο Τύπου

SAE International Approves TIR J2954 for PH/EV Wireless Charging

WARRENDALE, Pa., May 17, 2016 – SAE International approved for publishing “SAE TIR J2954 Wireless Power Transfer for Light-Duty Plug-In/ Electric Vehicles and Alignment Methodology,” a milestone industry guideline to establish wireless power transfer between infrastructure, vehicle suppliers and OEMs for plug-in electric and electric vehicles (PH/EV). The document will be available from the SAE website on May 31st.

With wireless charging quickly becoming mainstream for consumer electronic devices in low power applications, standardization is needed for commercialization of high power wireless power transfer (WPT) of PH/EVs. In order to achieve a basis for the start of commercialization for WPT, it is important to define criteria for safety and electromagnetic limits, efficiency and interoperability targets, as well as a test setup for the acceptance of WPT – all of which is addressed in SAE TIR J2954.

SAE TIR J2954 is the first step in standardization and was developed by SAE International’s PH/EV Wireless Power Transfer committee, established in 2010. Jesse Schneider serves as the Chair of SAE International’s Wireless Power Transfer committee and is the Fuel Cell, Electric Vehicle and Standards Development Manager at BMW North America. He presented the SAE TIR J2954 today during the Conference for Electric Roads and Vehicles (CERV) in Logan, Utah.

“Wireless power transfer, using SAE TIR J2954 is a game changer for PH/EVs. This first in a series of documents will enable consumers to simply park their vehicles into spaces equipped with TIR J2954 equipment and walk away without doing anything to charge their PH/EV,” Schneider said. “Standardization of both the vehicle and ground infrastructure WPT has started with SAE TIR J2954. The frequency band, safety, interoperability, EMC/ EMF limits as well as coil definitions from SAE TIR J2954 enable any compatible vehicle to charge wirelessly from its WPT home charger, work, or a shopping mall WPT charger, etc. with the same charging ability. All of this makes it possible to seamlessly transfer power over an air gap with high efficiencies. SAE TIR J2954 WPT automates the process for charging and extends the range for the vehicle customer only by parking in the right spot.”

SAE TIR J2954 establishes a common frequency band using 85 kHz (81.39 – 90 kHz) for all light duty vehicle systems. In addition, four classes PH/EV of Wireless Power Transfer levels are given today. Future revisions may include even higher power levels:

3.7kW (WPT 1) specified in TIR J29547.7kW (WPT 2) specified in TIR J295411kW (WPT 3) to be specified in revision of J295422kW (WPT 4) to be specified in revision of J2954

TIR J2954 WPT compatible systems have been built by automakers and suppliers and are currently under test with a cross-industry team with the US Department of Energy, Idaho and Argonne National Labs. The test data, first in the bench and later in the vehicle, will be used to finalize the Standard by 2018 to support the roll out of this technology.

For more information about “SAE TIR J2954 Wireless Power Transfer for Light-Duty Plug-In/ Electric Vehicles and Alignment Methodology,” visit:

http://standards.sae.org/wip/j2954/

SAE International is a global association committed to being the ultimate knowledge source for the engineering profession. By uniting over 128,000 engineers and technical experts, we drive knowledge and expertise across a broad spectrum of industries. We act on two priorities: encouraging a lifetime of learning for mobility engineering professionals and setting the standards for industry engineering. We strive for a better world through the work of our charitable arm, the SAE Foundation, which helps fund programs like A World in Motion® and the Collegiate Design Series™.